top of page

We implement innovative and universal solutions in the field of warehouse automation for all business segments.

Conveyor systems

Roller conveyors of the system of trays and boxes

The 24V drive roller conveyor is driven by electric rollers connected by polyclinic belts to other rollers. Such equipment in combination with conveyor systems, such as gravity roller conveyors, belt conveyors, transfers, reversible modules, a system of sensors and controllers, allow to create a fully automated internal logistics system. The main task of the 24V drive roller conveyors is the accumulation and distribution of loads using separate buffer zones. Each zone is driven by a separate electric roller with the possibility of changing the speed or direction of movement.

Direct and rotary drive roller conveyor

The drive conveyor is a roller conveyor in which the drive from the engine is transmitted to the (rollers) by the transmission shaft. The drive module is a section that has its own drive. It is a base module that connects with the conscious straight sections, rotating and corner segments of any configuration. Device of complex steel frames, rolls, shaft, belts PU, motor and blend.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C÷45°C.

  • Maximum speed: 1 m/s.

  • Diameter of the roller: 50 mm.

  • Roller surface: Galvanized

  • Drive: 400V.

  • Drive transmission: Round-belt PU.

  • Transfer method: From shaft to roller.

Direct and rotary gravity roller conveyor. Rolgang

The direct section of the gravity roller conveyor can be installed at an angle or horizontally. When mounted at an angle, the speed of the transported objects increases in proportion to the degree of tilt. The device consists of steel frames, direct gravitation rolls, and blends.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C÷45°C.

  • Speed depends on the load and angle of the tilt section.

  • Diameter of the roller: 50 mm.

  • Roller surface: Galvanized.

Direct folding roller conveyor

Gravity lift gates allow to pass freely through the main line of the conveyor. When the chair is raised, the traffic flow is stopped and resumed after lowering into the starting position. The device consists of steel frames, lifting system, straight gravel rollers and blends.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C÷45°C.

  • Speed depends on the load and angle of the tilt section.

  • Diameter of the roller: 50 mm.

  • Roller surface: Galvanized

Roller corner drive Merge

The angular drive roller, depending on the location, helps to enter the object on the main line or to get to the secondary line, using breaks in cargo transportation. Directly related to the rotating module or pop-up. The appliance consists of steel frames formed under an angle of 30 °, 45 °, electric clip, PolyVee rolls, straps, controller, vibration sensors.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Connection angle: 30°, 45°.

  • Operating temperatures: 5°C÷45°C.

  • Maximum speed: 1 m/s.

  • Diameter of the roller: 50 mm.

  • Roller surface: Galvanized

  • Drive: 24V.

  • Drive gear: V-belt.

  • Transfer method: From roller to roller.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Connection angle: 30°, 45°.

  • Operating temperatures: 5°C÷45°C.

  • Maximum speed: 1 m/s.

  • Diameter of the roller: 50 mm.

  • Roller surface: Galvanized

  • Drive transmission: Round-belt PU.

  • Transfer method: From shaft to roller.

Roller angular drive LINESHAFT

The corner roller conveyor, depending on the location, helps to introduce the load to the main line or to remove it from the main secondary line. Corner role works in

system with a drive roller lineshaft. The device consists of a steel frame formed at an angle of 30°, 45° rollers, a shaft, PU belts and blend.

Vertical lifting conveyor

A vertical elevator allows you to transport objects on four levels. All elevators are individually designed in accordance with the customer's requirements. The carriages are fully adjusted to the conveyor. Device set: rack, elevator column, zonal carriages-transporters.

Technical characteristics:

  • Maximum load: 150 kg.

  • Operating temperatures: 5°C÷45°C.

  • Maximum speed: 2 m/s.

  • Number of carriages: 1÷2.

  • Drive type: Brake motor.

  • Drive: 400 V.

  • Power: Engine power: 4 kW.

  • Drive gear: Toothed belt.

Spiral gravity elevator

A spiral elevator is a sturdy structure that consists of a gravity conveyor spiral mounted on a supporting rack. The dimensions depend on the transported objects and the place of installation. All elevators are individually designed according to the needs of the client. The set of the device: a spiral carrying a gravity spiral structure (straight and rotating gravity segments), supports.

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C÷45°C.

  • Speed depends on shipment.

  • Spiral pitch: 750mm.

Diverter

The main function of transfers used in warehouse automation systems is transfer of cargo between direct or parallel directions. The load is lifted by the electric motor and then transferred to the connecting lines by means of transmission belts. The transfer of the load is carried out perpendicular to the direction of travel with simultaneous change of its orientation to 90 °.

Belt transfer

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C ÷ 45°C.

  • Maximum speed: 1 m/s.

  • Angle of discharge: 90 °

  • Maximum number of lanes: 4.

  • Drive: 24V.

  • Drive transmission: Transmission belt.

  • Transfer method: From electric clip to belt.

Diverter

The Pop-up module is used to redirect loads to an adjacent line set at an angle of 30 ° or 45°. Objects are lifted with the help of an electric motor, and then move on the rollers under a certain constant angle. When using this device, the object does not change the orientation during redirection.

POP-UP module

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C ÷ 45°C.

  • Maximum speed: 1 m/s.

  • Angle of discharge: 30 ° / 45 °.

  • The direction of discharge is right/left.

  • Maximum number of rows: 6.

  • Drive: 24V.

  • Drive gear: PU strap.

  • Transfer method: From electric clip to roller.

Diverter

The rotating module is used to redirect objects to lines located at 30 °, 45 °, or 90 ° angle. Loads are redirected according to the position of the roller. In some cases, it is possible to change the direction of the object by 90°.

Rotary module

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 5°C ÷ 45°C.

  • Maximum speed: 1 m/s.

  • Angle of discharge: 30 ° / 45 ° / 90 °

  • Number of rows: 2.

  • Drive: 24V.

  • Drive gear: PU strap.

  • Transfer method: From electric clip to roller.

Belt conveyor systems of trays and boxes

Belt conveyors are used to transport objects of fixed shapes and different sizes. The advantage of this type of equipment is a very low noise level and minimal vibration, smooth operation and a great moment, which is twisting, since the moment of start-up. Interlevel belt conveyor is necessary to transport objects between levels. It is highly productive.

Direct and zonal drive belt conveyor

This type of conveyor combines the function of two systems - belt conveyor and zone roller. Thanks to the belt on which the object is being moved, the conveyor accumulates goods of different shapes and sizes. Each zone is moving with an electric clip, which allows to set individual transfer speed in each zone separately. The conveyor consists of steel frames, electric rollers, rollers and transport belt, system of tension and supporting rollers, controllers, sensors and blend.

Zonal belt conveyor

Technical characteristics:

  • Maximum load: 30 kg/zone.

  • Operating temperatures: 0°C ÷ 40°C.

  • Maximum speed: 1 m/s.

  • Belt material: Polyester and PVC.

  • Drive: 24V.

  • Drive gear: Transport strap.

  • Method of transmission: From electric clip to belt.

Direct and zonal drive belt conveyor

This is a high-performance device. Thanks to its construction, it ensures that the entire surface of the object is covered. It is an ideal solution for transportation of small goods, polyethylene packages and other soft bottom goods. The conveyor consists of a drive console, steel frames, transport belt, system of tension and support rollers, and a blend.

Belt conveyor

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 0°C ÷ 40°C.

  • Maximum speed: 1 m/s.

  • Belt material: Polyester and PVC.

  • Support plate surface: Galvanized.

  • Drive: 400V.

  • Drive gear: Transport strap.

  • Transfer method: From drive shaft to belt.

It is used in structures that require the transportation of items between levels. The coordinated operation of the upper and lower fracture allows the object to smoothly overcome the lift. The conveyor consists of a drive console, steel frames, transport belt, system of tension and support rollers, and a blend.

Interlevel belt conveyor

Technical characteristics:

  • Maximum load: 50 kg/m.

  • Operating temperatures: 0°C ÷ 40°C.

  • Maximum speed: 1 m/s.

  • Belt material: Polyester and PVC.

  • Support plate surface: Galvanized.

  • Drive: 400V.

  • Drive gear: Transport strap.

  • Transfer method: From drive shaft to belt.

Spiral belt conveyor descent/ascent

Universal spiral conveyor for medium and large-sized products. It is ideal for handling recycled packaged products and boxes in logistics and is used for a variety of functions, from lifting to storage. The system of lateral rollers is simple and reliable, and control bodies and sensors are not needed. Continuous motion is the ideal solution for complex situations involving unstable products and high production speeds.

SpiralVeyor SV

Technical characteristics:

  • Belt width range:300-600 mm 12-24".

  • Multi-belt: 1-3 parallel belts.

  • Load range: per strap up to 50 kg/m | 34 lb/ft.

  • Speed range: standard up to 60 m/min 200 ft/min

  • Altitude: Almost limited, usually 15 m | 50 ft drive system.

  • Belt length: up to 60 m per 200 ft drive system.

Spiral belt conveyor descent/ascent

These spiral conveyors with an extremely wide belt, specially designed for processing of oversized products, beams and bulk materials. SVE combines a 50% smaller design with a tape 30% wider than other spiral conveyors available on the market. There is no comparison. The wide tape consists of several parallel tracks that form a single belt conveyor. The location of several belt tracks provides increased tractive power for high loads, while leaving a compact option in its own way.

SpiralVeyor SVe-Series

Technical characteristics:

  • Belt width range: 600-1200 mm | 24-48 in.

  • Multi-track belt: 2 - 3 parallel belts.

  • Load range: per tape, up to 100 kg/m | 67 lb/ft.

  • Speed range: up to 60 m/min 200 ft/min

  • Altitude: practically not limited, usually for travel 15 m | 50 feet.

  • Belt length: up to 60 m per 200 ft drive system.

Technical characteristics:

​

  • Range of circle width: 100 mm | 4".

  • Nominal width of the product in light: 300, 400, 600 mm | 12, 16, 24".

  • Load range: 35 kg/m | 23,5 lb/ft.

  • Speed range: Up to 60 m/min 200 feet per minute.

  • Altitude: Almost unlimited, usually 15 m | 50 ft drive system.

  • System length: 200 ft.

It is specially designed to work with rigid objects of the same form factor. The spiral conveyor is based on single-track technology. The difference is in the design of the belt with the shape of the back in the form of a scorpion. This patented design provides linear contact with much greater grip on the workpieces to be worked on. This allows the machine to lift objects that are larger than the width of the belt with greater stability, possibly at a greater incline and with less expense.

SpiralVeyor SVo

Pallet conveyor systems
Pallet conveyor systems
Direct drive and gravity roller conveyor

The roller conveyor is used for horizontal transportation of cargo units. Transportation takes place in the longitudinal direction

Chain conveyor (double lane)

Direct drive chain and gear conveyor

It is used for transporting wooden pallets or similar containers. Transportation takes place in the transverse direction.
There is also a three lane chain conveyor used for transportation
different types of pallets.

Chain conveyor (double lane)

Direct drive chain and gear conveyor

The chain combi-conveyor is used for horizontal transportation of roller containers with appropriate dimensions and weight.

Conveyor with toothed belts

Roller rotary table

Converter which rotates with a roller conveyor is used to change the direction of movement or turn the transported units in the longitudinal direction. Performs standard 90° and 180° turns. Rotation is carried out by a friction wheel. A chain conveyor can also be equipped with this rotary converter.

Rotary roller conveyors 1200

Direct drive chain and gear conveyor

The rotating elements of the roller conveyor are used to change the direction or turn of the container units during transportation. Turns are made at 90° and 180°. Rotation is carried out by a chain drive. A chain conveyor can be equipped with this rotary converter.

Rotary mechanism 1500

Displacing and rotating elements of the conveyor

Displacing and rotating elements of the conveyor perform, first of all, turning pallets from transverse transportation on a chain conveyor to longitudinal transportation on a roller conveyor, without changing the direction of transportation. The function can also be performed in the reverse direction. The rotation is carried out by a chain drive.

Displacing and rotating elements of the conveyor

Direct drive chain and gear conveyor

Chain displacement elements of the conveyor are mainly used in warehouses with a low flow of goods. This equipment serves to move the transported material by 90° without changing its direction. The rotation is performed by the rotary movement (eccentric washer) of the chain conveyor.

Chain displacement elements of the conveyor

The horizontal conveyor is intended for moving blocks that were removed from the conveyor, moved and transferred to another conveyor element. It is available with fixed drive. This conveyor is used for short distances. Chain, roller and belt conveyors can be provided with this element. Automatic stacker crane in numbers.

Moving a unit of container

Vertical dispenser and Pallet shuttle

The dispenser serves for stacking 12 standard pallets, as well as for their disassembly. Pallets can be fed longitudinally and transversely. Both roller and chain conveyors are suitable for each desired type of transportation. There are several types of pallet dispensers: pneumatic dispensers for use in the food industry, electric dispensers with a focus on high performance and hydraulic dispensers for use in compact installations.

Dispenser

Direct drive chain and gear conveyor

A pallet shuttle (VW) is a horizontal conveyor for moving small loads that were taken from other conveyors, moved and transferred to another transport element. It is equipped with a stationary or moving drive. The pallet shuttle is used for medium and larger movings as a loading and unloading element. A chain, roller and belt conveyor, as well as telescopic forks, can be used as a load-grabbing device.

Pallet shuttle

The horizontal conveyor is designed to move blocks that have been removed from the conveyor, moved and transferred to another conveying element. It is available with stationary drive. Such a conveyor is used for moving over short distances. Chain, roller and belt conveyors can be equipped with this element. Automatic stacker cranes in numbers.

Movement of tare units

Flexible conveyor systems of trays and boxes

It is widely used in goods transshipment, courier sorting and small firms. Facilitates loading and unloading of goods between the load area and the vehicle. Due to the use of the "scissors system" the conveyor can be installed in different forms, for example In The form Of Letters C, S, O, and also to adjust its length.